Anasorb Sorbent Tubes

Anasorb^® 747 is a synthetic carbon with low ash content which studies showed as a candidate material for sampling polar organic compounds that cannot be sampled using coconut charcoal, such as ketones. Anasorb 747^® has properties similar to the best petroleum charcoals and can be used for a very wide range of polar and non-polar organic vapours. When combined with a solvent appropriate to mixtures such as dimethylformamide, successful sampling is possible for a majority of organic vapours.

Table Notes:

Tube Ends:

GS:  Glass Sealed
GO: Glass Open
SS:  Stainless Steel Open

Protective Tube Covers:

A:  6 mm OD x 70 mm length
B:  8 mm OD x 110 mm length
C:  10 mm OD x 150 mm length
D:  10 mm OD x 220 mm length and shorter tubes
P:   Low-volume PUF Tube Holder - Do not use an adjustable low flow holder
V:  OVS Tube Holder - Do not use an adjustable low flow holder

Separators:

W:  Glass Wool
G:  Glass Fibre Filter
F:  Foam
N:  Nylon Ring
Q:  Quartz Filter
R:  Glass Spacer
S:  Screen
T:  PTFE Ring

Anasorb^® 727 is a microporous polymer for sampling less volatile reactive and polar compounds. It is derived from cross-linked styrene and similar monomers, and its sorbent properties are similar to Chromosorb^® 106. The surface area is large, very unreactive, and extremely hydrophobic.

Table Notes:

Tube Ends:

GS:  Glass Sealed
GO: Glass Open
SS:  Stainless Steel Open

Protective Tube Covers:

A:  6 mm OD x 70 mm length
B:  8 mm OD x 110 mm length
C:  10 mm OD x 150 mm length
D:  10 mm OD x 220 mm length and shorter tubes
P:   Low-volume PUF Tube Holder - Do not use an adjustable low flow holder
V:  OVS Tube Holder - Do not use an adjustable low flow holder

Separators:

W:  Glass Wool
G:  Glass Fibre Filter
F:  Foam
N:  Nylon Ring
Q:  Quartz Filter
R:  Glass Spacer
S:  Screen
T:  PTFE Ring

Anasorb^® 708 is equivalent to Chromosorb^® 108.

Table Notes:

Tube Ends:

GS:  Glass Sealed
GO: Glass Open
SS:  Stainless Steel Open

Protective Tube Covers:

A:  6 mm OD x 70 mm length
B:  8 mm OD x 110 mm length
C:  10 mm OD x 150 mm length
D:  10 mm OD x 220 mm length and shorter tubes
P:   Low-volume PUF Tube Holder - Do not use an adjustable low flow holder
V:  OVS Tube Holder - Do not use an adjustable low flow holder

Separators:

W:  Glass Wool
G:  Glass Fibre Filter
F:  Foam
N:  Nylon Ring
Q:  Quartz Filter
R:  Glass Spacer
S:  Screen
T:  PTFE Ring

Anasorb^® C300 sorbent is equivalent to Hydrar, Carulite.

Table Notes:

Tube Ends:

GS:  Glass Sealed
GO: Glass Open
SS:  Stainless Steel Open

Protective Tube Covers:

A:  6 mm OD x 70 mm length
B:  8 mm OD x 110 mm length
C:  10 mm OD x 150 mm length
D:  10 mm OD x 220 mm length and shorter tubes
P:   Low-volume PUF Tube Holder - Do not use an adjustable low flow holder
V:  OVS Tube Holder - Do not use an adjustable low flow holder

Separators:

W:  Glass Wool
G:  Glass Fibre Filter
F:  Foam
N:  Nylon Ring
Q:  Quartz Filter
R:  Glass Spacer
S:  Screen
T:  PTFE Ring

Anasorb^® CSC sorbent has a high surface area for sampling a broad range of primarily non-polar compounds.

Table Notes:

Tube Ends:

GS:  Glass Sealed
GO: Glass Open
SS:  Stainless Steel Open

Protective Tube Covers:

A:  6 mm OD x 70 mm length
B:  8 mm OD x 110 mm length
C:  10 mm OD x 150 mm length
D:  10 mm OD x 220 mm length and shorter tubes
P:   Low-volume PUF Tube Holder - Do not use an adjustable low flow holder
V:  OVS Tube Holder - Do not use an adjustable low flow holder

Separators:

W:  Glass Wool
G:  Glass Fibre Filter
F:  Foam
N:  Nylon Ring
Q:  Quartz Filter
R:  Glass Spacer
S:  Screen
T:  PTFE Ring

Anasorb^® GCB1 - Graphitised Carbon Black for sampling aliphatic and aromatic hydrocarbons and is equivalent to Carbotrap^® B (20/40) and Carbopack B (60/80). This sorbent has proven to be valuable for sampling compounds of intermediate to high volatility.

Anasorb^® GCB2 - Graphitised Carbon Black for sampling less volatile compounds. This sorbent has a low surface area and is equivalent to Carbotrap^® C (20/40) and Carbopack C (60/80), and is useful in collecting semi-volatile organic compounds (SVOCs).

Note that thermally purged sorbent tubes are for immediate use in the field. Unpurged tubes are purged by a laboratory as needed.

Table Notes:

‡  Tubes are chemically conditioned before shipping; use within 6 months or recondition. Restocking fee applies.
§  Each tube has a flow direction arrow and unique number.

Tube Ends:

GS:  Glass Sealed
GO: Glass Open
SS:  Stainless Steel Open

Protective Tube Covers:

A:  6 mm OD x 70 mm length
B:  8 mm OD x 110 mm length
C:  10 mm OD x 150 mm length
D:  10 mm OD x 220 mm length and shorter tubes
P:   Low-volume PUF Tube Holder - Do not use an adjustable low flow holder
V:  OVS Tube Holder - Do not use an adjustable low flow holder

Separators:

W:  Glass Wool
G:  Glass Fibre Filter
F:  Foam
N:  Nylon Ring
Q:  Quartz Filter
R:  Glass Spacer
S:  Screen
T:  PTFE Ring
O: Other

Trademarks:

Anasorb^® — SKC Inc
Chromosorb ^® — Manville Corp.
Porapak ^® — Waters Associates, Inc.
Tenax ^® — Buchem B.V.
XAD ^® — Rohm & Haas