Stick-to-it Lift Tape

The Stick-to-it Lift Tape samples surfaces for biological contaminants. The flexible plastic microscopic slide has an adhesive area used for sampling biological and inorganic dust contamination on surfaces. The slide adhesive is simply pressed to the surface, and the slide placed in the provided mailer, ready for sending to a laboratory for analysis.

Stick-to-it
Stick-to-it

Advantages over glass slides:

  • Non-destructive: Use Stick-to-it safely on most surfaces.
  • Flexible: No glass slide to break during sample transport.
  • Easier to handle: Unlike tape, Stick-to-it allows a quick, mess-free sample, effective transport to a laboratory, and easy microscopic analysis. No baggies, glass slides, cross contamination, sample loss, slide breakage, or slide mounting.
  • Time-saving: Good for initial site sampling to indicate whether or not further sampling is needed. Stick-to-it samples indicate all mold present in a specific area and may reveal indoor areas contaminated with spores that have not become airborne.

Using Stick-to-it:

  • Remove slide from the mailer.
  • Document required information for the laboratory.
  • Remove liner from the adhesive. (Pull liner from top down for best results.)
  • Press adhesive area to surface to be sampled.
  • Place slide into provided slide mailer.
  • Send to an accredited laboratory for analysis.

Passive Sampler Selection GuidePassive Sampler Selection Guide
Hazard SearchHazard Search
What is Air Sampling?What is Air Sampling?
CTA ContactCTA Contact