Tubing for Air Sampling
SKC offers a range of tubing, manufactured in Tygon™, latex rubber, polyurethane and PTFE, to suit a variety of applications.
Consider your application before selecting tubing:
- Tubing attached to the sampling media outlet does not contact the sample; therefore, the tubing used is not critical. Select the tubing best suited for the media and pump.
- Tubing attached to the sampling media inlet for gas/vapour sampling contacts the sample during specialised applications such as bag sampling. Inert PTFE tubing is recommended because it prevents adsorption of the sample on the tubing’s inner surface.
- Tubing attached to the sampling media inlet for particulate sampling contacts the sample during specialised applications such as microvacuum sampling. Tygon tubing is typically used, as PTFE tubing can cause sample loss in the tubing due to static effect.
A range of complimentary tubing accessories is also available.
Tubing
| Description | Applications | ID inches (mm) |
OD inches (mm) |
Length m | Part Number | |
| Tygon | Sampling trains | 3/16 (4.76) | 5/16 (7.94) | 3 | 225-1346 |  |
| Tygon | Sampling trains: fits over Impinger sidearm and inlet, filter cassette outlet, or Luer adaptor |
1/4 (6.35) | 3/8 (9.53) | 1 3 15 |
225-13-4A 225-13-4 225-1345 |
|
| Tygon | Sampling trains, and also for use with High Flow chek-mate pulsation dampener (375-150) | 3/8 (9.53) | 1/2 (12.7) | 3 15 1 |
225-1351 225-1352 225-1351A |
|
| Tygon | Fits over outlet of VersaTrap Spore Cassette. | 1/2 (12.7) | 5/8 (15.88) | 3 | 225-1353 | |
| Latex rubber, black | Sampling trains | 3/16 (4.76) | 5/16 (7.94) | 3.7 | 226-03-003 |  |
| Latex rubber, black | Sampling trains: Fits over Impinger sidearm and inlet, filter cassette outlet, or Luer adaptor |
1/4 (6.35) | 3/8 (9.53) | 3.7 | 226-03-004 | |
| Latex rubber, amber | Sampling trains: Fits over Impinger sidearm and inlet, filter cassette outlet, or Luer adaptor |
1/4 (6.35) | 3/8 (9.53) | 3 | 225-1347 |  |
| Polyurethane, reinforced to avoid kinking | Sampling trains: Fits over Impinger sidearm and inlet, filter cassette outlet, or Luer adaptor |
3/16 (4.76) | 1/4 (6.35) | 1 3 |
225-1350A 225-1350 |
 |
| PTFE † | Inert for Bag Sampling: Fits inside bag fitting |
1/16 (1.59) | 1/8 (3.18) | 3 | 231-9-21 |  |
| PTFE † | Inert for Bag Sampling: Fits over bag fitting |
3/16 (4.76) | 1/4 (6.35) | 3 0.9 |
231-9-23 231-927 |
|
| PTFE † | Inert for bag sampling: Fits Vac-U-Chamber sample inlet |
1/4 (6.35) | 5/16 (7.94) | 3 15 |
231-937 231-924 |
|
| Tygon | Calibration Tubing for Deployable Cartridge Sampler (DCS) | 5/16 (7.94) | 9/16 (14.3) | 3 | 225-1349 | |
† PTFE is not suitable for particulate sampling because static effect can cause sample loss in the tubing
Tubing Accessories
| Description | Pack Size | Part Number | |
| PVC Adaptors, Luer taper connects to 1/4" ID tubing | 10 250 |
225-13-2 225-132A |
 |
| Nickel-plated Brass Adaptors, Luer taper connects to 1/4" ID tubing | 10 | 225-13-3 |  |
| Spring Tubing Support Inserts, for use with 5/16" OD tubing to prevent kinking | 5 | 225-1348 |  |
| Tubing, Collar Clip and Cable Tie, for attaching a sampling cassette to the collar, includes 0.9 m(3ft) of ¼ inch ID Tygon tubing and one crocodile clip attached to a nylon cable tie. | Each | 225-13-8 |  |
| Collar Clip and Cable Ties only | 10 25 |
225-13-6 225-13-6A |
 |
| Tubing Adaptor Kit for Twin Port Pocket Pump (discontinued) for bag sampling. Includes two lengths of silicone tubing: 1/8-inch ID, ¼-inch OD for bag fitting and 3/16-inch ID, 3/8-inch OD for pump fitting. For use with PTFE tubing Part Number 231-9-23 | Each | 231-926 |  |
| Tubing Adaptor Kit for OVS Tubes, includes tubing and adaptor. The tygon tubing is 1/4" ID x 3/8" OD, the silicone tubing is 3/8" ID x 5/8" OD. |
Each | 224-31 |  |
| Tubing adaptor for small sample tubes. Enables leak free connection of small diameter sorbent tubes to the Low Flow chek-mate (375-00205) or rotameters. | Each | 717-511 |  |
| Quick-Connect Sampling Bag Adaptor for Pocket Pump TOUCH. Installs on exhaust port of Pocket Pump TOUCH. Holds rigid PTFE 1/4in OD tubing securely for bag sampling. Simply press to release tubing. | Each | 220-200 |  |
